diff --git a/.config/kitty/kitty.conf b/.config/kitty/kitty.conf index c671c1f..51fa74b 100644 --- a/.config/kitty/kitty.conf +++ b/.config/kitty/kitty.conf @@ -1,1527 +1,85 @@ -# vim:fileencoding=utf-8:foldmethod=marker - -#: Fonts {{{ - -#: kitty has very powerful font management. You can configure -#: individual font faces and even specify special fonts for particular -#: characters. +## fonts font_family Roboto Mono Regular bold_font Roboto Mono Bold italic_font Roboto Mono Italic bold_italic_font Roboto Mono Bold Italic - -#: You can specify different fonts for the bold/italic/bold-italic -#: variants. To get a full list of supported fonts use the `kitty -#: list-fonts` command. By default they are derived automatically, by -#: the OSes font system. Setting them manually is useful for font -#: families that have many weight variants like Book, Medium, Thick, -#: etc. For example:: - -#: font_family Operator Mono Book -#: bold_font Operator Mono Medium -#: italic_font Operator Mono Book Italic -#: bold_italic_font Operator Mono Medium Italic - font_size 9 - -#: Font size (in pts) - -force_ltr no - -#: kitty does not support BIDI (bidirectional text), however, for RTL -#: scripts, words are automatically displayed in RTL. That is to say, -#: in an RTL script, the words "HELLO WORLD" display in kitty as -#: "WORLD HELLO", and if you try to select a substring of an RTL- -#: shaped string, you will get the character that would be there had -#: the the string been LTR. For example, assuming the Hebrew word -#: ירושלים, selecting the character that on the screen appears to be ם -#: actually writes into the selection buffer the character י. kitty's -#: default behavior is useful in conjunction with a filter to reverse -#: the word order, however, if you wish to manipulate RTL glyphs, it -#: can be very challenging to work with, so this option is provided to -#: turn it off. Furthermore, this option can be used with the command -#: line program GNU FriBidi -#: to get BIDI -#: support, because it will force kitty to always treat the text as -#: LTR, which FriBidi expects for terminals. - -adjust_line_height 0 -adjust_column_width 0 - -#: Change the size of each character cell kitty renders. You can use -#: either numbers, which are interpreted as pixels or percentages -#: (number followed by %), which are interpreted as percentages of the -#: unmodified values. You can use negative pixels or percentages less -#: than 100% to reduce sizes (but this might cause rendering -#: artifacts). - -adjust_baseline 0 - -#: Adjust the vertical alignment of text (the height in the cell at -#: which text is positioned). You can use either numbers, which are -#: interpreted as pixels or a percentages (number followed by %), -#: which are interpreted as the percentage of the line height. A -#: positive value moves the baseline up, and a negative value moves -#: them down. The underline and strikethrough positions are adjusted -#: accordingly. - -# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols +font_features none symbol_map U+E007-U+F8E8 Font Awesome 5 Brands symbol_map U+F022 Font Awesome 5 Free -#: Map the specified unicode codepoints to a particular font. Useful -#: if you need special rendering for some symbols, such as for -#: Powerline. Avoids the need for patched fonts. Each unicode code -#: point is specified in the form U+. You -#: can specify multiple code points, separated by commas and ranges -#: separated by hyphens. symbol_map itself can be specified multiple -#: times. Syntax is:: -#: symbol_map codepoints Font Family Name - -disable_ligatures never - -#: Choose how you want to handle multi-character ligatures. The -#: default is to always render them. You can tell kitty to not render -#: them when the cursor is over them by using cursor to make editing -#: easier, or have kitty never render them at all by using always, if -#: you don't like them. The ligature strategy can be set per-window -#: either using the kitty remote control facility or by defining -#: shortcuts for it in kitty.conf, for example:: - -#: map alt+1 disable_ligatures_in active always -#: map alt+2 disable_ligatures_in all never -#: map alt+3 disable_ligatures_in tab cursor - -#: Note that this refers to programming ligatures, typically -#: implemented using the calt OpenType feature. For disabling general -#: ligatures, use the font_features setting. - -# font_features none - -#: Choose exactly which OpenType features to enable or disable. This -#: is useful as some fonts might have features worthwhile in a -#: terminal. For example, Fira Code Retina includes a discretionary -#: feature, zero, which in that font changes the appearance of the -#: zero (0), to make it more easily distinguishable from Ø. Fira Code -#: Retina also includes other discretionary features known as -#: Stylistic Sets which have the tags ss01 through ss20. - -#: For the exact syntax to use for individual features, see the -#: Harfbuzz documentation . - -#: Note that this code is indexed by PostScript name, and not the font -#: family. This allows you to define very precise feature settings; -#: e.g. you can disable a feature in the italic font but not in the -#: regular font. - -#: On Linux, these are read from the FontConfig database first and -#: then this, setting is applied, so they can be configured in a -#: single, central place. - -#: To get the PostScript name for a font, use kitty + list-fonts -#: --psnames: - -#: .. code-block:: sh - -#: $ kitty + list-fonts --psnames | grep Fira -#: Fira Code -#: Fira Code Bold (FiraCode-Bold) -#: Fira Code Light (FiraCode-Light) -#: Fira Code Medium (FiraCode-Medium) -#: Fira Code Regular (FiraCode-Regular) -#: Fira Code Retina (FiraCode-Retina) - -#: The part in brackets is the PostScript name. - -#: Enable alternate zero and oldstyle numerals:: - -#: font_features FiraCode-Retina +zero +onum - -#: Enable only alternate zero:: - -#: font_features FiraCode-Retina +zero - -#: Disable the normal ligatures, but keep the calt feature which (in -#: this font) breaks up monotony:: - -#: font_features TT2020StyleB-Regular -liga +calt - -#: In conjunction with force_ltr, you may want to disable Arabic -#: shaping entirely, and only look at their isolated forms if they -#: show up in a document. You can do this with e.g.:: - -#: font_features UnifontMedium +isol -medi -fina -init - -box_drawing_scale 0.001, 1, 1.5, 2 - -#: Change the sizes of the lines used for the box drawing unicode -#: characters These values are in pts. They will be scaled by the -#: monitor DPI to arrive at a pixel value. There must be four values -#: corresponding to thin, normal, thick, and very thick lines. - -#: }}} - -#: Cursor customization {{{ - -cursor #cccccc - -#: Default cursor color - -cursor_text_color #111111 - -#: Choose the color of text under the cursor. If you want it rendered -#: with the background color of the cell underneath instead, use the -#: special keyword: background +## cursor cursor_shape underline - -#: The cursor shape can be one of (block, beam, underline). Note that -#: when reloading the config this will be changed only if the cursor -#: shape has not been set by the program running in the terminal. - cursor_beam_thickness 1.0 - -#: Defines the thickness of the beam cursor (in pts) - cursor_underline_thickness 0.5 -#: Defines the thickness of the underline cursor (in pts) - -cursor_blink_interval -1 - -#: The interval (in seconds) at which to blink the cursor. Set to zero -#: to disable blinking. Negative values mean use system default. Note -#: that numbers smaller than repaint_delay will be limited to -#: repaint_delay. - -cursor_stop_blinking_after 15.0 - -#: Stop blinking cursor after the specified number of seconds of -#: keyboard inactivity. Set to zero to never stop blinking. - -#: }}} - -#: Scrollback {{{ - scrollback_lines 50000 -#: Number of lines of history to keep in memory for scrolling back. -#: Memory is allocated on demand. Negative numbers are (effectively) -#: infinite scrollback. Note that using very large scrollback is not -#: recommended as it can slow down performance of the terminal and -#: also use large amounts of RAM. Instead, consider using -#: scrollback_pager_history_size. Note that on config reload if this -#: is changed it will only affect newly created windows, not existing -#: ones. - -scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER - -#: Program with which to view scrollback in a new window. The -#: scrollback buffer is passed as STDIN to this program. If you change -#: it, make sure the program you use can handle ANSI escape sequences -#: for colors and text formatting. INPUT_LINE_NUMBER in the command -#: line above will be replaced by an integer representing which line -#: should be at the top of the screen. Similarly CURSOR_LINE and -#: CURSOR_COLUMN will be replaced by the current cursor position. - -scrollback_pager_history_size 0 - -#: Separate scrollback history size, used only for browsing the -#: scrollback buffer (in MB). This separate buffer is not available -#: for interactive scrolling but will be piped to the pager program -#: when viewing scrollback buffer in a separate window. The current -#: implementation stores the data in UTF-8, so approximatively 10000 -#: lines per megabyte at 100 chars per line, for pure ASCII text, -#: unformatted text. A value of zero or less disables this feature. -#: The maximum allowed size is 4GB. Note that on config reload if this -#: is changed it will only affect newly created windows, not existing -#: ones. - -scrollback_fill_enlarged_window no - -#: Fill new space with lines from the scrollback buffer after -#: enlarging a window. - -wheel_scroll_multiplier 5.0 - -#: Modify the amount scrolled by the mouse wheel. Note this is only -#: used for low precision scrolling devices, not for high precision -#: scrolling on platforms such as macOS and Wayland. Use negative -#: numbers to change scroll direction. - -touch_scroll_multiplier 1.0 - -#: Modify the amount scrolled by a touchpad. Note this is only used -#: for high precision scrolling devices on platforms such as macOS and -#: Wayland. Use negative numbers to change scroll direction. - -#: }}} - -#: Mouse {{{ - -mouse_hide_wait 3.0 - -#: Hide mouse cursor after the specified number of seconds of the -#: mouse not being used. Set to zero to disable mouse cursor hiding. -#: Set to a negative value to hide the mouse cursor immediately when -#: typing text. Disabled by default on macOS as getting it to work -#: robustly with the ever-changing sea of bugs that is Cocoa is too -#: much effort. - -url_color #0087bd -url_style curly - -#: The color and style for highlighting URLs on mouse-over. url_style -#: can be one of: none, single, double, curly - -open_url_with default - -#: The program with which to open URLs that are clicked on. The -#: special value default means to use the operating system's default -#: URL handler. - -url_prefixes http https file ftp gemini irc gopher mailto news git - -#: The set of URL prefixes to look for when detecting a URL under the -#: mouse cursor. - -detect_urls yes - -#: Detect URLs under the mouse. Detected URLs are highlighted with an -#: underline and the mouse cursor becomes a hand over them. Even if -#: this option is disabled, URLs are still clickable. - -url_excluded_characters - -#: Additional characters to be disallowed from URLs, when detecting -#: URLs under the mouse cursor. By default, all characters legal in -#: URLs are allowed. - -copy_on_select no - -#: Copy to clipboard or a private buffer on select. With this set to -#: clipboard, simply selecting text with the mouse will cause the text -#: to be copied to clipboard. Useful on platforms such as macOS that -#: do not have the concept of primary selections. You can instead -#: specify a name such as a1 to copy to a private kitty buffer -#: instead. Map a shortcut with the paste_from_buffer action to paste -#: from this private buffer. For example:: - -#: map cmd+shift+v paste_from_buffer a1 - -#: Note that copying to the clipboard is a security risk, as all -#: programs, including websites open in your browser can read the -#: contents of the system clipboard. - -strip_trailing_spaces never - -#: Remove spaces at the end of lines when copying to clipboard. A -#: value of smart will do it when using normal selections, but not -#: rectangle selections. always will always do it. - -select_by_word_characters @-./_~?&=%+# - -#: Characters considered part of a word when double clicking. In -#: addition to these characters any character that is marked as an -#: alphanumeric character in the unicode database will be matched. - -click_interval -1.0 - -#: The interval between successive clicks to detect double/triple -#: clicks (in seconds). Negative numbers will use the system default -#: instead, if available, or fallback to 0.5. - -focus_follows_mouse no - -#: Set the active window to the window under the mouse when moving the -#: mouse around - -pointer_shape_when_grabbed arrow - -#: The shape of the mouse pointer when the program running in the -#: terminal grabs the mouse. Valid values are: arrow, beam and hand - -default_pointer_shape beam - -#: The default shape of the mouse pointer. Valid values are: arrow, -#: beam and hand - -pointer_shape_when_dragging beam - -#: The default shape of the mouse pointer when dragging across text. -#: Valid values are: arrow, beam and hand - -#: Mouse actions {{{ - -#: Mouse buttons can be remapped to perform arbitrary actions. The -#: syntax for doing so is: - -#: .. code-block:: none - -#: mouse_map button-name event-type modes action - -#: Where ``button-name`` is one of ``left``, ``middle``, ``right`` or -#: ``b1 ... b8`` with added keyboard modifiers, for example: -#: ``ctrl+shift+left`` refers to holding the ctrl+shift keys while -#: clicking with the left mouse button. The number ``b1 ... b8`` can -#: be used to refer to upto eight buttons on a mouse. - -#: ``event-type`` is one ``press``, ``release``, ``doublepress``, -#: ``triplepress``, ``click`` and ``doubleclick``. ``modes`` -#: indicates whether the action is performed when the mouse is grabbed -#: by the program running in the terminal, or not. It can have one or -#: more or the values, ``grabbed,ungrabbed``. ``grabbed`` refers to -#: when the program running in the terminal has requested mouse -#: events. Note that the click and double click events have a delay of -#: click_interval to disambiguate from double and triple presses. - -#: You can run kitty with the kitty --debug-input command line option -#: to see mouse events. See the builtin actions below to get a sense -#: of what is possible. - -#: If you want to unmap an action map it to ``no-op``. For example, to -#: disable opening of URLs with a plain click:: - -#: mouse_map left click ungrabbed no-op - -#: .. note:: -#: Once a selection is started, releasing the button that started it will -#: automatically end it and no release event will be dispatched. - -clear_all_mouse_actions no - -#: You can have kitty remove all mouse actions seen up to this point. -#: Useful, for instance, to remove the default mouse actions. - -mouse_map left click ungrabbed mouse_click_url_or_select -mouse_map shift+left click grabbed,ungrabbed mouse_click_url_or_select -mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_click_url - -#: Variant with ctrl+shift is present because the simple click based -#: version has an unavoidable delay of click_interval, to disambiguate -#: clicks from double clicks. - -mouse_map ctrl+shift+left press grabbed discard_event - -#: Prevent this press event from being sent to the program that has -#: grabbed the mouse, as the corresponding release event is used to -#: open a URL. - -mouse_map middle release ungrabbed paste_from_selection -mouse_map left press ungrabbed mouse_selection normal -mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle -mouse_map left doublepress ungrabbed mouse_selection word -mouse_map left triplepress ungrabbed mouse_selection line - -#: Select the entire line - -mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point - -#: Select from the clicked point to the end of the line - -mouse_map right press ungrabbed mouse_selection extend - -#: If you want only the end of the selection to be moved instead of -#: the nearest boundary, use move-end instead of extend. - -mouse_map shift+middle release ungrabbed,grabbed paste_selection -mouse_map shift+left press ungrabbed,grabbed mouse_selection normal -mouse_map shift+ctrl+alt+left press ungrabbed,grabbed mouse_selection rectangle -mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word -mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line - -#: Select the entire line - -mouse_map shift+ctrl+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point - -#: Select from the clicked point to the end of the line - -mouse_map shift+right press ungrabbed,grabbed mouse_selection extend -#: }}} - -#: }}} - -#: Performance tuning {{{ - -repaint_delay 10 - -#: Delay (in milliseconds) between screen updates. Decreasing it, -#: increases frames-per-second (FPS) at the cost of more CPU usage. -#: The default value yields ~100 FPS which is more than sufficient for -#: most uses. Note that to actually achieve 100 FPS you have to either -#: set sync_to_monitor to no or use a monitor with a high refresh -#: rate. Also, to minimize latency when there is pending input to be -#: processed, repaint_delay is ignored. - -input_delay 3 - -#: Delay (in milliseconds) before input from the program running in -#: the terminal is processed. Note that decreasing it will increase -#: responsiveness, but also increase CPU usage and might cause flicker -#: in full screen programs that redraw the entire screen on each loop, -#: because kitty is so fast that partial screen updates will be drawn. - -sync_to_monitor yes - -#: Sync screen updates to the refresh rate of the monitor. This -#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) -#: when scrolling. However, it limits the rendering speed to the -#: refresh rate of your monitor. With a very high speed mouse/high -#: keyboard repeat rate, you may notice some slight input latency. If -#: so, set this to no. - -#: }}} - -#: Terminal bell {{{ - enable_audio_bell no -#: Enable/disable the audio bell. Useful in environments that require -#: silence. - -visual_bell_duration 0.0 - -#: Visual bell duration. Flash the screen when a bell occurs for the -#: specified number of seconds. Set to zero to disable. - -window_alert_on_bell yes - -#: Request window attention on bell. Makes the dock icon bounce on -#: macOS or the taskbar flash on linux. - -bell_on_tab yes - -#: Show a bell symbol on the tab if a bell occurs in one of the -#: windows in the tab and the window is not the currently focused -#: window - -command_on_bell none - -#: Program to run when a bell occurs. The environment variable -#: KITTY_CHILD_CMDLINE can be used to get the program running in the -#: window in which the bell occurred. - -#: }}} - -#: Window layout {{{ +## windows remember_window_size no initial_window_width 2100 initial_window_height 1150 - -#: If enabled, the window size will be remembered so that new -#: instances of kitty will have the same size as the previous -#: instance. If disabled, the window will initially have size -#: configured by initial_window_width/height, in pixels. You can use a -#: suffix of "c" on the width/height values to have them interpreted -#: as number of cells instead of pixels. - -enabled_layouts * - -#: The enabled window layouts. A comma separated list of layout names. -#: The special value all means all layouts. The first listed layout -#: will be used as the startup layout. Default configuration is all -#: layouts in alphabetical order. For a list of available layouts, see -#: the https://sw.kovidgoyal.net/kitty/overview/#layouts. - -window_resize_step_cells 2 -window_resize_step_lines 2 - -#: The step size (in units of cell width/cell height) to use when -#: resizing windows. The cells value is used for horizontal resizing -#: and the lines value for vertical resizing. - -window_border_width 0.5pt - -#: The width of window borders. Can be either in pixels (px) or pts -#: (pt). Values in pts will be rounded to the nearest number of pixels -#: based on screen resolution. If not specified the unit is assumed to -#: be pts. Note that borders are displayed only when more than one -#: window is visible. They are meant to separate multiple windows. - -draw_minimal_borders yes - -#: Draw only the minimum borders needed. This means that only the -#: minimum needed borders for inactive windows are drawn. That is only -#: the borders that separate the inactive window from a neighbor. Note -#: that setting a non-zero window margin overrides this and causes all -#: borders to be drawn. - -window_margin_width 0 - -#: The window margin (in pts) (blank area outside the border). A -#: single value sets all four sides. Two values set the vertical and -#: horizontal sides. Three values set top, horizontal and bottom. Four -#: values set top, right, bottom and left. - -single_window_margin_width -1 - -#: The window margin (in pts) to use when only a single window is -#: visible. Negative values will cause the value of -#: window_margin_width to be used instead. A single value sets all -#: four sides. Two values set the vertical and horizontal sides. Three -#: values set top, horizontal and bottom. Four values set top, right, -#: bottom and left. - window_padding_width 1 - -#: The window padding (in pts) (blank area between the text and the -#: window border). A single value sets all four sides. Two values set -#: the vertical and horizontal sides. Three values set top, horizontal -#: and bottom. Four values set top, right, bottom and left. - -placement_strategy center - -#: When the window size is not an exact multiple of the cell size, the -#: cell area of the terminal window will have some extra padding on -#: the sides. You can control how that padding is distributed with -#: this option. Using a value of center means the cell area will be -#: placed centrally. A value of top-left means the padding will be on -#: only the bottom and right edges. - active_border_color #C0C0C0 -#: The color for the border of the active window. Set this to none to -#: not draw borders around the active window. - -inactive_border_color #cccccc - -#: The color for the border of inactive windows - -bell_border_color #ff5a00 - -#: The color for the border of inactive windows in which a bell has -#: occurred - -inactive_text_alpha 1.0 - -#: Fade the text in inactive windows by the specified amount (a number -#: between zero and one, with zero being fully faded). - -hide_window_decorations no - -#: Hide the window decorations (title-bar and window borders) with -#: yes. On macOS, titlebar-only can be used to only hide the titlebar. -#: Whether this works and exactly what effect it has depends on the -#: window manager/operating system. Note that the effects of changing -#: this setting when reloading config are undefined. - -resize_debounce_time 0.1 - -#: The time (in seconds) to wait before redrawing the screen when a -#: resize event is received. On platforms such as macOS, where the -#: operating system sends events corresponding to the start and end of -#: a resize, this number is ignored. - -resize_draw_strategy static - -#: Choose how kitty draws a window while a resize is in progress. A -#: value of static means draw the current window contents, mostly -#: unchanged. A value of scale means draw the current window contents -#: scaled. A value of blank means draw a blank window. A value of size -#: means show the window size in cells. - -resize_in_steps no - -#: Resize the OS window in steps as large as the cells, instead of -#: with the usual pixel accuracy. Combined with an -#: initial_window_width and initial_window_height in number of cells, -#: this option can be used to keep the margins as small as possible -#: when resizing the OS window. Note that this does not currently work -#: on Wayland. - -confirm_os_window_close 0 - -#: Ask for confirmation when closing an OS window or a tab that has at -#: least this number of kitty windows in it. A value of zero disables -#: confirmation. This confirmation also applies to requests to quit -#: the entire application (all OS windows, via the quit action). - -#: }}} - -#: Tab bar {{{ - -tab_bar_edge bottom - -#: Which edge to show the tab bar on, top or bottom - -tab_bar_margin_width 0.0 - -#: The margin to the left and right of the tab bar (in pts) - -tab_bar_margin_height 0.0 0.0 - -#: The margin above and below the tab bar (in pts). The first number -#: is the margin between the edge of the OS Window and the tab bar and -#: the second number is the margin between the tab bar and the -#: contents of the current tab. - -tab_bar_style fade - -#: The tab bar style, can be one of: - -#: fade -#: Each tab's edges fade into the background color (see tab_fade) -#: slant -#: Tabs look like the tabs in a physical file -#: separator -#: Tabs are separated by a configurable separator (see tab_separator) -#: powerline -#: Tabs are shown as a continuous line with "fancy" separators (see tab_powerline_style) -#: hidden -#: The tab bar is hidden. If you use this, you might want to create a mapping -#: for the https://sw.kovidgoyal.net/kitty/actions/#select-tab action which presents you with a list -#: of tabs and allows for easy switching to a tab. - -tab_bar_min_tabs 2 - -#: The minimum number of tabs that must exist before the tab bar is -#: shown - -tab_switch_strategy previous - -#: The algorithm to use when switching to a tab when the current tab -#: is closed. The default of previous will switch to the last used -#: tab. A value of left will switch to the tab to the left of the -#: closed tab. A value of right will switch to the tab to the right of -#: the closed tab. A value of last will switch to the right-most tab. - -tab_fade 0.25 0.5 0.75 1 - -#: Control how each tab fades into the background when using fade for -#: the tab_bar_style. Each number is an alpha (between zero and one) -#: that controls how much the corresponding cell fades into the -#: background, with zero being no fade and one being full fade. You -#: can change the number of cells used by adding/removing entries to -#: this list. - -tab_separator " ┇" - -#: The separator between tabs in the tab bar when using separator as -#: the tab_bar_style. - -tab_powerline_style angled - -#: The powerline separator style between tabs in the tab bar when -#: using powerline as the tab_bar_style, can be one of: angled, -#: slanted, or round. - -tab_activity_symbol none - -#: Some text or a unicode symbol to show on the tab if a window in the -#: tab that does not have focus has some activity. If you want to use -#: leading or trailing spaces surround the text with quotes. - -tab_title_template "{title}" - -#: A template to render the tab title. The default just renders the -#: title. If you wish to include the tab-index as well, use something -#: like: {index}: {title}. Useful if you have shortcuts mapped for -#: goto_tab N. If you prefer to see the index as a superscript, use -#: {sup.index}. In addition you can use {layout_name} for the current -#: layout name, {num_windows} for the number of windows in the tab and -#: {num_window_groups} for the number of window groups (not counting -#: overlay windows) in the tab. Note that formatting is done by -#: Python's string formatting machinery, so you can use, for instance, -#: {layout_name[:2].upper()} to show only the first two letters of the -#: layout name, upper-cased. If you want to style the text, you can -#: use styling directives, for example: -#: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green -#: bg{fmt.bg.normal}. Similarly, for bold and italic: -#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. - -active_tab_title_template none - -#: Template to use for active tabs, if not specified falls back to -#: tab_title_template. - -active_tab_foreground #000 -active_tab_background #eee -active_tab_font_style bold-italic -inactive_tab_foreground #444 -inactive_tab_background #999 -inactive_tab_font_style normal - -#: Tab bar colors and styles - -tab_bar_background none - -#: Background color for the tab bar. Defaults to using the terminal -#: background color. - -#: }}} - -#: Color scheme {{{ +## colors foreground #BABABA background #073642 -#: The foreground and background colors - -background_opacity 1.0 - -#: The opacity of the background. A number between 0 and 1, where 1 is -#: opaque and 0 is fully transparent. This will only work if -#: supported by the OS (for instance, when using a compositor under -#: X11). Note that it only sets the background color's opacity in -#: cells that have the same background color as the default terminal -#: background. This is so that things like the status bar in vim, -#: powerline prompts, etc. still look good. But it means that if you -#: use a color theme with a background color in your editor, it will -#: not be rendered as transparent. Instead you should change the -#: default background color in your kitty config and not use a -#: background color in the editor color scheme. Or use the escape -#: codes to set the terminals default colors in a shell script to -#: launch your editor. Be aware that using a value less than 1.0 is a -#: (possibly significant) performance hit. If you want to dynamically -#: change transparency of windows set dynamic_background_opacity to -#: yes (this is off by default as it has a performance cost). Changing -#: this setting when reloading the config will only work if -#: dynamic_background_opacity was enabled in the original config. - -background_image none - -#: Path to a background image. Must be in PNG format. - -background_image_layout tiled - -#: Whether to tile or scale the background image. - -background_image_linear no - -#: When background image is scaled, whether linear interpolation -#: should be used. - -dynamic_background_opacity no - -#: Allow changing of the background_opacity dynamically, using either -#: keyboard shortcuts (increase_background_opacity and -#: decrease_background_opacity) or the remote control facility. -#: Changing this setting by reloading the config is not supported. - -background_tint 0.0 - -#: How much to tint the background image by the background color. The -#: tint is applied only under the text area, not margin/borders. Makes -#: it easier to read the text. Tinting is done using the current -#: background color for each window. This setting applies only if -#: background_opacity is set and transparent windows are supported or -#: background_image is set. - -dim_opacity 0.75 - -#: How much to dim text that has the DIM/FAINT attribute set. One -#: means no dimming and zero means fully dimmed (i.e. invisible). - -selection_foreground #000000 - -#: The foreground for text selected with the mouse. A value of none -#: means to leave the color unchanged. - -selection_background #fffacd - -#: The background for text selected with the mouse. - -#: The color table {{{ - -#: The 256 terminal colors. There are 8 basic colors, each color has a -#: dull and bright version, for the first 16 colors. You can set the -#: remaining 240 colors as color16 to color255. - +#: black color0 #000000 color8 #666666 -#: black - +#: red color1 #E8341C color9 #E05A4F -#: red - +#: green color2 #68C256 color10 #77B869 -#: green - +#: yellow color3 #F2D42C color11 #EFD64B -#: yellow - +#: blue color4 #1C98E8 color12 #387CD3 -#: blue - +#: magenta color5 #8E69C9 color13 #957BBE -#: magenta - +#: cyan color6 #1C98E8 color14 #3D97E2 -#: cyan - +#: white color7 #BABABA color15 #BABABA -#: white - -mark1_foreground black - -#: Color for marks of type 1 - -mark1_background #98d3cb - -#: Color for marks of type 1 (light steel blue) - -mark2_foreground black - -#: Color for marks of type 2 - -mark2_background #f2dcd3 - -#: Color for marks of type 1 (beige) - -mark3_foreground black - -#: Color for marks of type 3 - -mark3_background #f274bc - -#: Color for marks of type 3 (violet) - -#: }}} - -#: }}} - -#: Advanced {{{ - -shell . - -#: The shell program to execute. The default value of . means to use -#: whatever shell is set as the default shell for the current user. -#: Note that on macOS if you change this, you might need to add -#: --login and --interactive to ensure that the shell starts in -#: interactive mode and reads its startup rc files. - -editor . - -#: The terminal editor (such as ``vim`` or ``nano``) to use when -#: editing the kitty config file or similar tasks. - -#: The default value of . means to use the environment variables -#: VISUAL and EDITOR in that order. If these variables aren't set, -#: kitty will run your shell (``$SHELL -l -i -c env``) to see if your -#: shell config files set VISUAL or EDITOR. If that doesn't work, -#: kitty will cycle through various known editors (``vim``, ``emacs``, -#: etc) and take the first one that exists on your system. - -close_on_child_death no - -#: Close the window when the child process (shell) exits. If no (the -#: default), the terminal will remain open when the child exits as -#: long as there are still processes outputting to the terminal (for -#: example disowned or backgrounded processes). If yes, the window -#: will close as soon as the child process exits. Note that setting it -#: to yes means that any background processes still using the terminal -#: can fail silently because their stdout/stderr/stdin no longer work. - -allow_remote_control no - -#: Allow other programs to control kitty. If you turn this on other -#: programs can control all aspects of kitty, including sending text -#: to kitty windows, opening new windows, closing windows, reading the -#: content of windows, etc. Note that this even works over ssh -#: connections. You can chose to either allow any program running -#: within kitty to control it, with yes or only programs that connect -#: to the socket specified with the kitty --listen-on command line -#: option, if you use the value socket-only. The latter is useful if -#: you want to prevent programs running on a remote computer over ssh -#: from controlling kitty. Reloading the config will not affect this -#: setting. - -listen_on none - -#: Tell kitty to listen to the specified unix/tcp socket for remote -#: control connections. Note that this will apply to all kitty -#: instances. It can be overridden by the kitty --listen-on command -#: line flag. This option accepts only UNIX sockets, such as -#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment -#: variables are expanded. If {kitty_pid} is present then it is -#: replaced by the PID of the kitty process, otherwise the PID of the -#: kitty process is appended to the value, with a hyphen. This option -#: is ignored unless you also set allow_remote_control to enable -#: remote control. See the help for kitty --listen-on for more -#: details. Changing this option by reloading the config is not -#: supported. - -# env - -#: Specify environment variables to set in all child processes. Note -#: that environment variables are expanded recursively, so if you -#: use:: - -#: env MYVAR1=a -#: env MYVAR2=${MYVAR1}/${HOME}/b - -#: The value of MYVAR2 will be a//b. - -update_check_interval 24 - -#: Periodically check if an update to kitty is available. If an update -#: is found a system notification is displayed informing you of the -#: available update. The default is to check every 24 hrs, set to zero -#: to disable. Changing this option by reloading the config is not -#: supported. - -startup_session none - -#: Path to a session file to use for all kitty instances. Can be -#: overridden by using the kitty --session command line option for -#: individual instances. See -#: https://sw.kovidgoyal.net/kitty/overview/#startup-sessions in the -#: kitty documentation for details. Note that relative paths are -#: interpreted with respect to the kitty config directory. Environment -#: variables in the path are expanded. Changing this option by -#: reloading the config is not supported. - -clipboard_control write-clipboard write-primary - -#: Allow programs running in kitty to read and write from the -#: clipboard. You can control exactly which actions are allowed. The -#: set of possible actions is: write-clipboard read-clipboard write- -#: primary read-primary. The default is to allow writing to the -#: clipboard and primary selection. Note that enabling the read -#: functionality is a security risk as it means that any program, even -#: one running on a remote server via SSH can read your clipboard. See -#: also clipboard_max_size. - -clipboard_max_size 64 - -#: The maximum size (in MB) of data from programs running in kitty -#: that will be stored for writing to the system clipboard. See also -#: clipboard_control. A value of zero means no size limit is applied. - -allow_hyperlinks yes - -#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 -#: escape sequences are ignored. Otherwise they become clickable -#: links, that you can click by holding down ctrl+shift and clicking -#: with the mouse. The special value of ``ask`` means that kitty will -#: ask before opening the link. +## shell_integration shell_integration no-cursor + +## key maps + map kitty_mod+y launch --stdin-source=@last_cmd_output --type=clipboard - -term xterm-kitty - -#: The value of the TERM environment variable to set. Changing this -#: can break many terminal programs, only change it if you know what -#: you are doing, not because you read some advice on Stack Overflow -#: to change it. The TERM variable is used by various programs to get -#: information about the capabilities and behavior of the terminal. If -#: you change it, depending on what programs you run, and how -#: different the terminal you are changing it to is, various things -#: from key-presses, to colors, to various advanced features may not -#: work. Changing this option by reloading the config will only affect -#: newly created windows. - -#: }}} - -#: OS specific tweaks {{{ - -wayland_titlebar_color system - -#: Change the color of the kitty window's titlebar on Wayland systems -#: with client side window decorations such as GNOME. A value of -#: system means to use the default system color, a value of background -#: means to use the background color of the currently active window -#: and finally you can use an arbitrary color, such as #12af59 or red. - -macos_titlebar_color system - -#: Change the color of the kitty window's titlebar on macOS. A value -#: of system means to use the default system color, a value of -#: background means to use the background color of the currently -#: active window and finally you can use an arbitrary color, such as -#: #12af59 or red. WARNING: This option works by using a hack, as -#: there is no proper Cocoa API for it. It sets the background color -#: of the entire window and makes the titlebar transparent. As such it -#: is incompatible with background_opacity. If you want to use both, -#: you are probably better off just hiding the titlebar with -#: hide_window_decorations. - -macos_option_as_alt no - -#: Use the option key as an alt key. With this set to no, kitty will -#: use the macOS native Option+Key = unicode character behavior. This -#: will break any Alt+key keyboard shortcuts in your terminal -#: programs, but you can use the macOS unicode input technique. You -#: can use the values: left, right, or both to use only the left, -#: right or both Option keys as Alt, instead. Changing this setting by -#: reloading the config is not supported. - -macos_hide_from_tasks no - -#: Hide the kitty window from running tasks (⌘+Tab) on macOS. Changing -#: this setting by reloading the config is not supported. - -macos_quit_when_last_window_closed no - -#: Have kitty quit when all the top-level windows are closed. By -#: default, kitty will stay running, even with no open windows, as is -#: the expected behavior on macOS. - -macos_window_resizable yes - -#: Disable this if you want kitty top-level (OS) windows to not be -#: resizable on macOS. Changing this setting by reloading the config -#: will only affect newly created windows. - -macos_thicken_font 0 - -#: Draw an extra border around the font with the given width, to -#: increase legibility at small font sizes. For example, a value of -#: 0.75 will result in rendering that looks similar to sub-pixel -#: antialiasing at common font sizes. - -macos_traditional_fullscreen no - -#: Use the traditional full-screen transition, that is faster, but -#: less pretty. - -macos_show_window_title_in all - -#: Show or hide the window title in the macOS window or menu-bar. A -#: value of window will show the title of the currently active window -#: at the top of the macOS window. A value of menubar will show the -#: title of the currently active window in the macOS menu-bar, making -#: use of otherwise wasted space. all will show the title everywhere -#: and none hides the title in the window and the menu-bar. - -macos_custom_beam_cursor no - -#: Enable/disable custom mouse cursor for macOS that is easier to see -#: on both light and dark backgrounds. WARNING: this might make your -#: mouse cursor invisible on dual GPU machines. Changing this setting -#: by reloading the config is not supported. - -linux_display_server auto - -#: Choose between Wayland and X11 backends. By default, an appropriate -#: backend based on the system state is chosen automatically. Set it -#: to x11 or wayland to force the choice. Changing this setting by -#: reloading the config is not supported. - -#: }}} - -#: Keyboard shortcuts {{{ - -#: Keys are identified simply by their lowercase unicode characters. -#: For example: ``a`` for the A key, ``[`` for the left square bracket -#: key, etc. For functional keys, such as ``Enter or Escape`` the -#: names are present at https://sw.kovidgoyal.net/kitty/keyboard- -#: protocol/#functional-key-definitions. For a list of modifier names, -#: see: GLFW mods - -#: On Linux you can also use XKB key names to bind keys that are not -#: supported by GLFW. See XKB keys -#: for a list of key names. The name to use is the part -#: after the XKB_KEY_ prefix. Note that you can only use an XKB key -#: name for keys that are not known as GLFW keys. - -#: Finally, you can use raw system key codes to map keys, again only -#: for keys that are not known as GLFW keys. To see the system key -#: code for a key, start kitty with the kitty --debug-input option. -#: Then kitty will output some debug text for every key event. In that -#: text look for ``native_code`` the value of that becomes the key -#: name in the shortcut. For example: - -#: .. code-block:: none - -#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' - -#: Here, the key name for the A key is 0x61 and you can use it with:: - -#: map ctrl+0x61 something - -#: to map ctrl+a to something. - -#: You can use the special action no_op to unmap a keyboard shortcut -#: that is assigned in the default configuration:: - -#: map kitty_mod+space no_op - -#: You can combine multiple actions to be triggered by a single -#: shortcut, using the syntax below:: - -#: map key combine action1 action2 action3 ... - -#: For example:: - -#: map kitty_mod+e combine : new_window : next_layout - -#: this will create a new window and switch to the next available -#: layout - -#: You can use multi-key shortcuts using the syntax shown below:: - -#: map key1>key2>key3 action - -#: For example:: - -#: map ctrl+f>2 set_font_size 20 - -#: The full list of actions that can be mapped to key presses is -#: available here . - -kitty_mod ctrl+shift - -#: The value of kitty_mod is used as the modifier for all default -#: shortcuts, you can change it in your kitty.conf to change the -#: modifiers for all the default shortcuts. - -clear_all_shortcuts no - -#: You can have kitty remove all shortcut definition seen up to this -#: point. Useful, for instance, to remove the default shortcuts. - -# kitten_alias hints hints --hints-offset=0 - -#: You can create aliases for kitten names, this allows overriding the -#: defaults for kitten options and can also be used to shorten -#: repeated mappings of the same kitten with a specific group of -#: options. For example, the above alias changes the default value of -#: kitty +kitten hints --hints-offset to zero for all mappings, -#: including the builtin ones. - -#: Clipboard {{{ - -map kitty_mod+c copy_to_clipboard - -#: There is also a copy_or_interrupt action that can be optionally -#: mapped to Ctrl+c. It will copy only if there is a selection and -#: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt -#: will copy and clear the selection or send an interrupt if there is -#: no selection. - -map kitty_mod+v paste_from_clipboard -map kitty_mod+s paste_from_selection -# map kitty_mod+o pass_selection_to_program - -#: You can also pass the contents of the current selection to any -#: program using pass_selection_to_program. By default, the system's -#: open program is used, but you can specify your own, the selection -#: will be passed as a command line argument to the program, for -#: example:: - -#: map kitty_mod+o pass_selection_to_program firefox - -#: You can pass the current selection to a terminal program running in -#: a new kitty window, by using the @selection placeholder:: - -#: map kitty_mod+y new_window less @selection - -#: }}} - -#: Scrolling {{{ - -map kitty_mod+up scroll_line_up -map kitty_mod+down scroll_line_down -map kitty_mod+page_up scroll_page_up -map kitty_mod+page_down scroll_page_down -map kitty_mod+home scroll_home -map kitty_mod+end scroll_end map kitty_mod+f launch --type=overlay --stdin-source=@screen_scrollback fzf --tac --no-sort --no-mouse -i map kitty_mod+h show_scrollback - -#: You can pipe the contents of the current screen + history buffer as -#: STDIN to an arbitrary program using the ``launch`` function. For -#: example, the following opens the scrollback buffer in less in an -#: overlay window:: - -#: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R - -#: For more details on piping screen and buffer contents to external -#: programs, see launch. - -#: }}} - -#: Window management {{{ - map kitty_mod+enter launch --cwd=current map kitty_mod+o launch --cwd=current - -#: You can open a new window running an arbitrary program, for -#: example:: - -#: map kitty_mod+y launch mutt - -#: You can open a new window with the current working directory set to -#: the working directory of the current window using:: - -#: map ctrl+alt+enter launch --cwd=current - -#: You can open a new window that is allowed to control kitty via the -#: kitty remote control facility by prefixing the command line with @. -#: Any programs running in that window will be allowed to control -#: kitty. For example:: - -#: map ctrl+enter launch --allow-remote-control some_program - -#: You can open a new window next to the currently active window or as -#: the first window, with:: - -#: map ctrl+n launch --location=neighbor some_program -#: map ctrl+f launch --location=first some_program - -#: For more details, see launch. - -map kitty_mod+n new_os_window - -#: Works like new_window above, except that it opens a top level OS -#: kitty window. In particular you can use new_os_window_with_cwd to -#: open a window with the current working directory. - -map kitty_mod+w close_window - -# map kitty_mod+] next_window -# map kitty_mod+[ previous_window +map kitty_mod+x toggle_layout stack map alt+left previous_window map alt+up previous_window map alt+right next_window map alt+down next_window - -# map kitty_mod+f move_window_forward -map kitty_mod+b move_window_backward -map kitty_mod+` move_window_to_top -map kitty_mod+r start_resizing_window -map kitty_mod+1 first_window -map kitty_mod+2 second_window -map kitty_mod+3 third_window -map kitty_mod+4 fourth_window -map kitty_mod+5 fifth_window -map kitty_mod+6 sixth_window -map kitty_mod+7 seventh_window -map kitty_mod+8 eighth_window -map kitty_mod+9 ninth_window -map kitty_mod+0 tenth_window -#: }}} - -#: Tab management {{{ - -map kitty_mod+right next_tab -map kitty_mod+left previous_tab -map kitty_mod+t new_tab -map kitty_mod+q close_tab -map shift+cmd+w close_os_window -map kitty_mod+. move_tab_forward -map kitty_mod+, move_tab_backward -map kitty_mod+alt+t set_tab_title - -#: You can also create shortcuts to go to specific tabs, with 1 being -#: the first tab, 2 the second tab and -1 being the previously active -#: tab, and any number larger than the last tab being the last tab:: - -#: map ctrl+alt+1 goto_tab 1 -#: map ctrl+alt+2 goto_tab 2 - -#: Just as with new_window above, you can also pass the name of -#: arbitrary commands to run when using new_tab and use -#: new_tab_with_cwd. Finally, if you want the new tab to open next to -#: the current tab rather than at the end of the tabs list, use:: - -#: map ctrl+t new_tab !neighbor [optional cmd to run] -#: }}} - -#: Layout management {{{ - -map kitty_mod+l next_layout -map kitty_mod+x toggle_layout stack - -#: You can also create shortcuts to switch to specific layouts:: - -#: map ctrl+alt+t goto_layout tall -#: map ctrl+alt+s goto_layout stack - -#: Similarly, to switch back to the previous layout:: - -#: map ctrl+alt+p last_used_layout - -#: There is also a toggle layout function that switches to the named -#: layout or back to the previous layout if in the named layout. -#: Useful to temporarily "zoom" the active window by switching to the -#: stack layout:: - -#: map ctrl+alt+z toggle_layout stack -#: }}} - -#: Font sizes {{{ - -#: You can change the font size for all top-level kitty OS windows at -#: a time or only the current one. - -map kitty_mod+equal change_font_size all +2.0 -map kitty_mod+minus change_font_size all -2.0 -map kitty_mod+backspace change_font_size all 0 - -#: To setup shortcuts for specific font sizes:: - -#: map kitty_mod+f6 change_font_size all 10.0 - -#: To setup shortcuts to change only the current OS window's font -#: size:: - -#: map kitty_mod+f6 change_font_size current 10.0 -#: }}} - -#: Select and act on visible text {{{ - -#: Use the hints kitten to select text and either pass it to an -#: external program or insert it into the terminal or copy it to the -#: clipboard. - -map kitty_mod+e open_url_with_hints - -#: Open a currently visible URL using the keyboard. The program used -#: to open the URL is specified in open_url_with. - -map kitty_mod+p>f kitten hints --type path --program - - -#: Select a path/filename and insert it into the terminal. Useful, for -#: instance to run git commands on a filename output from a previous -#: git command. - -map kitty_mod+p>shift+f kitten hints --type path - -#: Select a path/filename and open it with the default open program. - -map kitty_mod+p>l kitten hints --type line --program - - -#: Select a line of text and insert it into the terminal. Use for the -#: output of things like: ls -1 - -map kitty_mod+p>w kitten hints --type word --program - - -#: Select words and insert into terminal. - -map kitty_mod+p>h kitten hints --type hash --program - - -#: Select something that looks like a hash and insert it into the -#: terminal. Useful with git, which uses sha1 hashes to identify -#: commits - -map kitty_mod+p>n kitten hints --type linenum - -#: Select something that looks like filename:linenum and open it in -#: vim at the specified line number. - -map kitty_mod+p>y kitten hints --type hyperlink - -#: Select a hyperlink (i.e. a URL that has been marked as such by the -#: terminal program, for example, by ls --hyperlink=auto). - - -#: The hints kitten has many more modes of operation that you can map -#: to different shortcuts. For a full description see kittens/hints. -#: }}} - -#: Miscellaneous {{{ - map F1 launch --allow-remote-control kitty +kitten broadcast map ctrl+alt+p kitten secrets.py "description" "Tilix Password" - -map kitty_mod+f11 toggle_fullscreen -map kitty_mod+f10 toggle_maximizedkitty_mod+ -map kitty_mod+u kitten unicode_input -map kitty_mod+f2 edit_config_file -map kitty_mod+escape kitty_shell window - -#: Open the kitty shell in a new window/tab/overlay/os_window to -#: control kitty using commands. - -map kitty_mod+a>m set_background_opacity +0.1 -map kitty_mod+a>l set_background_opacity -0.1 -map kitty_mod+a>1 set_background_opacity 1 -map kitty_mod+a>d set_background_opacity default -map kitty_mod+delete clear_terminal reset active - -#: You can create shortcuts to clear/reset the terminal. For example:: - -#: # Reset the terminal -#: map kitty_mod+f9 clear_terminal reset active -#: # Clear the terminal screen by erasing all contents -#: map kitty_mod+f10 clear_terminal clear active -#: # Clear the terminal scrollback by erasing it -#: map kitty_mod+f11 clear_terminal scrollback active -#: # Scroll the contents of the screen into the scrollback -#: map kitty_mod+f12 clear_terminal scroll active - -#: If you want to operate on all windows instead of just the current -#: one, use all instead of active. - -#: It is also possible to remap Ctrl+L to both scroll the current -#: screen contents into the scrollback buffer and clear the screen, -#: instead of just clearing the screen, for example, for ZSH add the -#: following to ~/.zshrc: - -#: .. code-block:: sh - -#: scroll-and-clear-screen() { -#: printf '\n%.0s' {1..$LINES} -#: zle clear-screen -#: } -#: zle -N scroll-and-clear-screen -#: bindkey '^l' scroll-and-clear-screen - -map kitty_mod+f5 load_config_file - -#: Reload kitty.conf, applying any changes since the last time it was -#: loaded. Note that a handful of settings cannot be dynamically -#: changed and require a full restart of kitty. You can also map a -#: keybinding to load a different config file, for example:: - -#: map f5 load_config /path/to/alternative/kitty.conf - -#: Note that all setting from the original kitty.conf are discarded, -#: in other words the new conf settings *replace* the old ones. - -map kitty_mod+f6 debug_config - -#: Show details about exactly what configuration kitty is running with -#: and its host environment. Useful for debugging issues. - - -#: You can tell kitty to send arbitrary (UTF-8) encoded text to the -#: client program when pressing specified shortcut keys. For example:: - -#: map ctrl+alt+a send_text all Special text - -#: This will send "Special text" when you press the ctrl+alt+a key -#: combination. The text to be sent is a python string literal so you -#: can use escapes like \x1b to send control codes or \u21fb to send -#: unicode characters (or you can just input the unicode characters -#: directly as UTF-8 text). The first argument to send_text is the -#: keyboard modes in which to activate the shortcut. The possible -#: values are normal or application or kitty or a comma separated -#: combination of them. The special keyword all means all modes. The -#: modes normal and application refer to the DECCKM cursor key mode -#: for terminals, and kitty refers to the special kitty extended -#: keyboard protocol. - -#: Another example, that outputs a word and then moves the cursor to -#: the start of the line (same as pressing the Home key):: - -#: map ctrl+alt+a send_text normal Word\x1b[H -#: map ctrl+alt+a send_text application Word\x1bOH - -#: }}} - -#: }}} -