Merge remote-tracking branch 'upstream/master'

modules/archive/README.md

@@ -31,9 +31,9 @@ installed:
   - *.7z* requires `7za`.
   - *.deb* requires `ar`, `tar`.
 
-Additionally, if `pigz` and/or `pbzip2` are installed, `archive` will use them over
-their traditional counterparts, `gzip` and `bzip2` respectively, to take full advantage
-of all available CPU cores for compression.
+Additionally, if `pigz` and/or `pbzip2` are installed, `archive` will use them
+over their traditional counterparts, `gzip` and `bzip2` respectively, to take
+full advantage of all available CPU cores for compression.
 
 Alternatives
 ------------

modules/autosuggestions/README.md

@@ -1,8 +1,3 @@
-Autosuggestions
----------------
-
-Integrates zsh-autosuggestions into Prezto.
-
 Autosuggestions
 ===============
 

modules/command-not-found/README.md

@@ -3,11 +3,12 @@ Command-Not-Found
 
 When you try to use a command that is not available locally, searches
 the package manager for a package offering that command and suggests
-the proper install command. 
+the proper install command.
 
-Debian-based and Arch Linux-based distributions use the [`command-not-found`][1] tool.
+Debian and Arch Linux based distributions use the [`command-not-found`][1] tool.
 
-macOS uses Homebrew's [`command-not-found` clone][2]. Note that you also need to [follow the instructions to tap the `command-not-found` homebrew repository][3].
+macOS uses Homebrew's [`command-not-found` clone][2]. Note that you also need to
+[follow the instructions][3] to tap the `command-not-found` homebrew repository.
 
 
 Authors

modules/completion/README.md

@@ -6,6 +6,19 @@ the [zsh-completions][1] project.
 
 This module must be loaded **after** the *utility* module.
 
+Options
+-------
+
+  - `COMPLETE_IN_WORD` complete from both ends of a word.
+  - `ALWAYS_TO_END` move cursor to the end of a completed word.
+  - `PATH_DIRS` perform path search even on command names with slashes.
+  - `AUTO_MENU` show completion menu on a successive tab press.
+  - `AUTO_LIST` automatically list choices on ambiguous completion.
+  - `AUTO_PARAM_SLASH` if completed parameter is a directory, add a trailing slash.
+  - `EXTENDED_GLOB` needed for file modification glob modifiers with compinit.
+  - `MENU_COMPLETE` do not autoselect the first completion entry.
+  - `FLOW_CONTROL` disable start/stop characters in shell editor.
+
 Settings
 --------
 

modules/completion/init.zsh

@@ -99,7 +99,7 @@ zstyle ':completion:*:history-words' remove-all-dups yes
 zstyle ':completion:*:history-words' list false
 zstyle ':completion:*:history-words' menu yes
 
-# Environmental Variables
+# Environment Variables
 zstyle ':completion::*:(-command-|export):*' fake-parameters ${${${_comps[(I)-value-*]#*,}%%,*}:#-*-}
 
 # Populate hostname completion. But allow ignoring custom entries from static

modules/editor/README.md

@@ -1,7 +1,17 @@
 Editor
 ======
 
-Sets key bindings.
+Sets editor specific key bindings options and variables.
+
+Options
+-------
+
+  - `BEEP` beep on error in line editor.
+
+Variables
+---------
+
+  - `WORDCHARS` treat a given set of characters as part of a word.
 
 Settings
 --------

modules/environment/README.md

@@ -5,9 +5,6 @@ Sets general shell options and defines environment variables.
 
 This module must be loaded first.
 
-Environment Variables
----------------------
-
 Contributors
 ------------
 
@@ -15,6 +12,39 @@ This module **MUST NOT** rely on any command not built in Zsh.
 
 Non-interactive environment variables should be defined in [`zshenv`][1].
 
+Options
+-------
+
+### General
+
+  - `COMBINING_CHARS` combine zero-length punctuation characters (accents) with
+    the base character.
+  - `INTERACTIVE_COMMENTS` enable comments in interactive shell.
+  - `RC_QUOTES` allow 'Henry''s Garage' instead of 'Henry'\''s Garage'.
+  - `MAIL_WARNING` don't print a warning message if a mail file has been accessed.
+
+### Jobs
+
+  - `LONG_LIST_JOBS` list jobs in the long format by default.
+  - `AUTO_RESUME` attempt to resume existing job before creating a new process.
+  - `NOTIFY` report status of background jobs immediately.
+  - `BG_NICE` don't run all background jobs at a lower priority.
+  - `HUP` don't kill jobs on shell exit.
+  - `CHECK_JOBS` don't report on jobs when shell exit.
+
+Variables
+---------
+
+### Termcap
+
+  - `LESS_TERMCAP_mb` begins blinking.
+  - `LESS_TERMCAP_md` begins bold.
+  - `LESS_TERMCAP_me` ends mode.
+  - `LESS_TERMCAP_se` ends standout-mode.
+  - `LESS_TERMCAP_so` begins standout-mode.
+  - `LESS_TERMCAP_ue` ends underline.
+  - `LESS_TERMCAP_us` begins underline.
+
 Authors
 -------
 

modules/history/README.md

@@ -3,13 +3,6 @@ History
 
 Sets [history][1] options and defines history aliases.
 
-Variables
----------
-
-  - `HISTFILE` stores the path to the history file.
-  - `HISTSIZE` stores the maximum number of events to save in the internal history.
-  - `SAVEHIST` stores the maximum number of events to save in the history file.
-
 Options
 -------
 
@@ -26,6 +19,13 @@ Options
   - `HIST_VERIFY` does not execute immediately upon history expansion.
   - `HIST_BEEP` beeps when accessing non-existent history.
 
+Variables
+---------
+
+  - `HISTFILE` stores the path to the history file.
+  - `HISTSIZE` stores the maximum number of events to save in the internal history.
+  - `SAVEHIST` stores the maximum number of events to save in the history file.
+
 Aliases
 -------
 

modules/history/init.zsh

@@ -6,14 +6,6 @@
 #   Sorin Ionescu <sorin.ionescu@gmail.com>
 #
 
-#
-# Variables
-#
-
-HISTFILE="${ZDOTDIR:-$HOME}/.zhistory"       # The path to the history file.
-HISTSIZE=10000                   # The maximum number of events to save in the internal history.
-SAVEHIST=10000                   # The maximum number of events to save in the history file.
-
 #
 # Options
 #
@@ -31,6 +23,14 @@ setopt HIST_SAVE_NO_DUPS         # Do not write a duplicate event to the history
 setopt HIST_VERIFY               # Do not execute immediately upon history expansion.
 setopt HIST_BEEP                 # Beep when accessing non-existent history.
 
+#
+# Variables
+#
+
+HISTFILE="${ZDOTDIR:-$HOME}/.zhistory"  # The path to the history file.
+HISTSIZE=10000                   # The maximum number of events to save in the internal history.
+SAVEHIST=10000                   # The maximum number of events to save in the history file.
+
 #
 # Aliases
 #

modules/homebrew/README.md

@@ -1,10 +1,10 @@
 Homebrew
 ========
 
-Defines Homebrew specific shell environment variables and aliases.
+Defines Homebrew specific environment variables and aliases.
 
-Environment Variables
----------------------
+Variables
+---------
 
 Execute the following to list the environment variables loaded in the shell:
 

modules/homebrew/init.zsh

@@ -11,7 +11,7 @@ if [[ "$OSTYPE" != (darwin|linux)* ]]; then
 fi
 
 #
-# Environmental Variables
+# Variables
 #
 
 # Load standard Homebrew shellenv into the shell session.

modules/prompt/functions/prompt_minimal_setup

@@ -47,4 +47,13 @@ function prompt_minimal_setup {
   RPROMPT=''
 }
 
+function prompt_minimal_preview {
+  local +h PROMPT=''
+  local +h RPROMPT=''
+  local +h SPROMPT=''
+
+  editor-info 2> /dev/null
+  prompt_preview_theme 'minimal'
+}
+
 prompt_minimal_setup "$@"

modules/prompt/functions/prompt_sorin_setup

@@ -144,16 +144,17 @@ function prompt_sorin_setup {
   zstyle ':prezto:module:git:info:keys' format \
     'status' '%b %p %c:%s%A%B%S%a%d%m%r%U%u'
 
+  # Set python-info parameters.
+  zstyle ':prezto:module:python:info:virtualenv' format '%f%F{3}(%v)%F{7} '
+
   # Set up non-zero return value display
   local show_return="✘ "
   # Default is to show the return value
   if zstyle -T ':prezto:module:prompt' show-return-val; then
     show_return+='%? '
   fi
-  # Set python-info format
-  zstyle ':prezto:module:python:info:virtualenv' format '%f%F{3}(%v)%F{7} '
 
-  # Get the async worker set up
+  # Get the async worker set up.
   _sorin_cur_git_root=''
 
   _prompt_sorin_git=''

modules/prompt/functions/prompt_steeef_setup

@@ -72,6 +72,9 @@ function prompt_steeef_setup {
   local unstaged_format="${_prompt_steeef_colors[2]}●%f"
   local staged_format="${_prompt_steeef_colors[5]}●%f"
 
+  # Set editor-info parameters.
+  zstyle ':prezto:module:editor:info:keymap:primary' format '$'
+
   # Set vcs_info parameters.
   zstyle ':vcs_info:*' enable bzr git hg svn
   zstyle ':vcs_info:*:prompt:*' check-for-changes true
@@ -87,8 +90,17 @@ function prompt_steeef_setup {
   # Define prompts.
   PROMPT="
 ${_prompt_steeef_colors[3]}%n%f at ${_prompt_steeef_colors[2]}%m%f in ${_prompt_steeef_colors[5]}%~%f "'${vcs_info_msg_0_}'"
-"'$python_info[virtualenv]'"$ "
+"'$python_info[virtualenv]${editor_info[keymap]} '
   RPROMPT=''
 }
 
+function prompt_steeef_preview {
+  local +h PROMPT=''
+  local +h RPROMPT=''
+  local +h SPROMPT=''
+
+  editor-info 2> /dev/null
+  prompt_preview_theme 'steeef'
+}
+
 prompt_steeef_setup "$@"

modules/python/README.md

@@ -6,7 +6,9 @@ Enables local Python and local Python package installation.
 Settings
 --------
 
-This module supports virtual environments from conda and virtualenvwrapper. By default, only virtualenvwrapper is enabled. To disable virtualenvwrapper, add the following to *zpreztorc*.
+This module supports virtual environments from conda and virtualenvwrapper. By
+default, only virtualenvwrapper is enabled. To disable virtualenvwrapper, add
+the following to *zpreztorc*.
 
 ```sh
 zstyle ':prezto:module:python' skip-virtualenvwrapper-init 'on'
@@ -52,8 +54,8 @@ virtualenvwrapper
 
 [`virtualenvwrapper`][2] is a frontend to the popular [`virtualenv`][3] utility.
 
-`virtualenv` creates isolated Python environments and `virtualenvwrapper` provides
-convenient shell functions to create, switch, and manage them.
+`virtualenv` creates isolated Python environments and `virtualenvwrapper`
+provides convenient shell functions to create, switch, and manage them.
 
 ### Usage
 

modules/rsync/init.zsh

@@ -14,7 +14,8 @@ fi
 # Aliases
 #
 
-_rsync_cmd='rsync --verbose --progress --human-readable --compress --archive --hard-links --one-file-system'
+_rsync_cmd='rsync --verbose --progress --human-readable --compress --archive \
+  --hard-links --one-file-system'
 
 if grep -q 'xattrs' <(rsync --help 2>&1); then
   _rsync_cmd="${_rsync_cmd} --acls --xattrs"

modules/utility/README.md

@@ -8,8 +8,8 @@ Settings
 
 ### Highlighting
 
-If you have enabled color globally in *zpreztorc*, you may disable it for certain
-commands.
+If you have enabled color globally in *zpreztorc*, you may disable it for
+certain commands.
 
 To disable `ls` color, add the following line to *zpreztorc*; when coloring is
 disabled, type indicators (\*, /, =>, @, =, |, %) will be appended to entries.
@@ -18,6 +18,12 @@ disabled, type indicators (\*, /, =>, @, =, |, %) will be appended to entries.
 zstyle ':prezto:module:utility:ls' color 'no'
 ```
 
+To disable GNU coreutils `ls` to list directories grouped first, add the following line to *zpreztorc*:
+
+```sh
+zstyle ':prezto:module:utility:ls' dirs-first 'no'
+```
+
 To disable `diff` highlighting, add the following line to *zpreztorc*:
 
 ```sh
@@ -109,7 +115,8 @@ Aliases
 
 ### Resource Usage
 
-  - `df` displays free disk space using human readable units (aliases to `pydf`, if installed).
+  - `df` displays free disk space using human readable units (aliases to `pydf`,
+    if installed).
   - `du` displays disk usage using human readable units.
   - `top` displays information about processes.
   - `topc` displays information about processes sorted by CPU usage.

modules/utility/init.zsh

@@ -73,7 +73,10 @@ fi
 # ls
 if is-callable 'dircolors'; then
   # GNU Core Utilities
-  alias ls='ls --group-directories-first'
+
+  if zstyle -T ':prezto:module:utility:ls' dirs-first; then
+    alias ls="${aliases[ls]:-ls} --group-directories-first"
+  fi
 
   if zstyle -t ':prezto:module:utility:ls' color; then
     # Call dircolors to define colors if they're missing